Wissenschaftliche Artikel (Journal Papers)

• Nikzad-Langerodi, R. (2024, October 15). Supervised and Penalized Baseline Correction. Chemometrics and Intelligent Laboratory Systems. Link: Supervised and penalized baseline correction – ScienceDirect
• Madreiter, T. (2025, February 28). Designing a sustainability monitoring platform for the Austrian Industry. Journal of Cleaner Production.
• Roßkogler, S. (2025, November 21). Life cycle analysis, a systemic approach. Leoben Conference on Polymer Engineering and Science.

Konferenzbeiträge (Conference Papers)

• Besinger, P. (2023, November 23). Responsible AI in Manufacturing: A Qualitative Framework. International Conference on Industry 4.0 and Smart Manufacturing 2023, Lisbon, Portugal.
• Fanta, B. (2024, June 2). Decision support systems for manufacturing. ETSI AI Conference, Sophia-Antipolis, France.
• Gal, B., Madreiter, T., Scheder, N., Liesinger, E., Hold, P., & Schlund, S. (2024, June 19). Expanding the boundaries of Zero Defect Manufacturing – A systematic literature review. CIRP LCE 2024, Turin, Italy.
• Berndt, R. (2024, August 28). A Platform Architecture for Data- and AI-supported human-centred Zero Defect Manufacturing for Sustainable Production. InCom 2024, Vienna, Austria.
• Wachter, A., Hartl-Nesic, C., & Kugi, A. (2024, August 28). Robot Base Placement Optimization for Pick-and-Place Sequences in Industrial Environments. InCom 2024, Vienna, Austria.
• Fanta, B. (2024, September 24). Practical IoT-Edge-Cloud continuum for BPMN-based quality assurance. MODELS 2024, Linz, Austria.
• Wachter, A., Kugi, A., & Hartl-Nesic, C. (2024, October 14). Time-Optimal TCP and Robot Base Placement for Pick-and-Place Tasks in Highly Constrained Environments. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2024), Abu Dhabi, United Arab Emirates.
• Bratu, O., & Wögerer, C. (2025, June 25). ZERO3 – Daten- und KI-gestütztes humanzentriertes Zero Defect Manufacturing für nachhaltige Produktion. e·nova International Conference 2025, Eisenstadt, Austria.
• Wachter, A., Hartl-Nesic, C., & Kugi, A. (2025, July 16). Leveraging Contact Dynamics for Energy- and Torque-Optimized Inverse Kinematics. IFAC Mechatronic Systems & Robotics 2025, Paris, France.
• Luftensteiner, S., Krikova, K., & Rainer, R. (2025, November 12). OCCF – Leveraging Lagged Correlation Analysis for Enhanced Insights in Continuous Industrial Data. 7th International Conference on Industry of the Future and Smart Manufacturing (ISM 2025), Valletta, Malta.
• Luftensteiner, S., Schrammel, J., Diamond, L., & Degenfellner, R. (2025, November 12). Smart Alerting: A Forecasting and Anomaly Detection System for Data-Driven Decision-Making. 7th International Conference on Industry of the Future and Smart Manufacturing (ISM 2025), Valletta, Malta.
• Luftensteiner, S., Schrammel, J., Diamond, L., & Degenfellner, R. (2025, November 12). Streamlining AI Model Development and Evaluation in Industrial Settings by Means of an Application. 7th International Conference on Industry of the Future and Smart Manufacturing (ISM 2025), Valletta, Malta.
• Roßkogler, S. (2025, November 21). Life Cycle Analysis, a Systemic Approach. Leoben Conference on Polymer Engineering and Science, Leoben, Austria.
• Mula, N. K., et al. (2025, November 26). AI-Based Ingredient Detection and Quantification in UV Ink Mixtures. 7th International Conference on Telecommunications and Communication Engineering (ICTCE 2025), Budapest, Hungary.
• Oppermann, M., Wachter, A., Hartl-Nesic, C., & Diamond, L. (2026, June 11). Interactive Visual Analysis of Robot Base Placement and Trajectory Optimization. EuroVis 2026, Nottingham, United Kingdom.
• Ederer, M., Ayalur, S., & Traxler, G. (2026, June 15). Comparison of Lockin- and Pulse Phase Thermography for Foreign Object Detection in Prepreg Ply Assembly. ECNDT 2026, Verona, Italy.
• Wachter, A., Willert, A., Ecker, M.-P., & Hartl-Nesic, C. (2026, June 1). Spatially-Aware Adaptive Trajectory Optimization with Controller-Guided Feedback for Autonomous Racing. Vienna, Austria.

Vorträge (Talks)

• Kugi, A. (2024, August 30). Keynote Speech. InCom 2024, Vienna, Austria.
• Oppermann, M. (2024, October 2). Virtual Forests, Real Skills. ÖBf Forschungstag, Salzburg, Austria.
• Oppermann, M. (2024, October 9). Visual Data Tools. Universität Wien, VDA, Vienna, Austria.
• Bratu, O., & Wögerer, C. (2025, March 19). Robotik für die Produktion. Handwerk 2025, Wels, Austria.
• Helmberger, W. (2025, March 21). Thema KI im Facility Management. WIFI Linz, Linz, Austria.
• Bratu, O., & Wögerer, C. (2025, May 13). ZERO3 – Daten- und KI-gestütztes humanzentriertes Zero Defect Manufacturing für nachhaltige Produktion. Automotive Expo 2025, Budapest, Hungary.
• Bratu, O., & Wögerer, C. (2025, June 25). ZERO3 – Daten- und KI-gestütztes humanzentriertes Zero Defect Manufacturing für nachhaltige Produktion. ENOVA 2025, Eisenstadt, Austria.
• Bratu, O., & Wögerer, C. (2025, July 2). ZERO3 – Daten- und KI-gestütztes humanzentriertes Zero Defect Manufacturing für nachhaltige Produktion. Bodensee Gespräche.
• Helmberger, W. (2025, September 1). Thema KI im Facility Management. WIFI Linz, Linz, Austria.
• Helmberger, W. (2026, March 7). Thema KI im Facility Management. WIFI Linz, Linz, Austria.

Workshops

• Nikzad-Langerodi, R. (2023, June 5). MSPC – Quo Vadis. Workshop AK Chemometrik, Berlin, Germany.
• Nikzad-Langerodi, R. (2023, June 12). Towards counterfactual Inference through domain-invariant Representation Learning. Nordic Probabilistic AI School, Trondheim, Norway.
• Reisinger, G. (2023, June 22). Research Insight: Zero Defect Manufacturing für eine nachhaltige Produktion (ZERO3-Projekt). Plattform Industrie 4.0, Online.
• Reisinger, G. (2023, June 27). Zero³ Online Workshop. FMTI, Online.
• Traxler, G. (2024, September 20). Erkennung von verborgenen Objekten mit Lockin Thermografie. Thermografie-Forum Eugendorf 2024, Eugendorf, Salzburg, Austria.
• Wachter, A. (2024, September 24). Zeitoptimale TCP- und Roboterbasisplatzierung für Pick-and-Place-Aufgaben in hochgradig eingeschränkten Umgebungen. GMA-FA 2.14 Systemtheorie und Regelungstechnik, Anif, Salzburg, Austria.
• Diamond, L. (2025, March 13). Human-in-the-loop: Lösungen für Mensch-Maschine-Kollaboration in der Produktion von morgen. Production & IT, Linz, Austria.
• Bratu, O., & Wögerer, C. (2025, March 26). Kreislaufwirtschaft und Design. ERF 2025, Stuttgart, Germany.
• Bratu, O., & Wögerer, C. (2025, March 27). Sustainable Robot Design. ERF 2025, Stuttgart, Germany.
• Oppermann, M., Diamond, L., Schrammel, J., & Mirnig, A. (2025, April 27). A conceptual model for interactive visual inspection and labeling to bridge automation and human quality control. CHI (AutomationXP), Yokohama, Japan.
• Bratu, O., & Wögerer, C. (2025, May). Quick-Check: KI & Robotik für nachhaltige Fertigungsprozesse. In-House-Veranstaltung PROFACTOR, Steyr, Austria.
• Bratu, O., & Wögerer, C. (2025, July 2). Session bei den Bodenseegesprächen. Bodensee Gespräche.
• Wögerer, C. (2025, October 1). Special Session zum Thema „Zero3“. AI5 Abschlussveranstaltung, Linz, Austria.
• Hartl-Nesic, C. (2026, January 25). Industry-Ready Robotics: Optimal Robots, Workcells, Planning, and Deployment in Flexible Manufacturing. Regelungstechnisches Kolloquium, Boppard, Germany.

Diplomarbeiten und Dissertationen

• Madreiter, T. (2023, May 10). Assessing Sustainability: Development of a Performance Indicator Set (Master’s thesis). ETH Zürich, Vienna, Austria.
• Boye, T. (2023, May 31). Nachgiebigkeitsregelung eines Roboter mit Geschwindigkeitsgeregelten Linearachsen (Diploma thesis). TU Wien, Vienna, Austria.
• Ban, P. F. (2024, September 27). Verbesserung der Absolut- und Regelgenauigkeit des KUKA LBR iiwa 14 R820 (Diploma thesis). TU Wien, Vienna, Austria.
• Weingartshofer, T. (2025, March 1). Flexible Path Planning for Robotic Industrial Manufacturing Processes (Dissertation). TU Wien, Vienna, Austria.
• Madreiter, T., & Scheder, N. (2025, September 24). Nachhaltiges Wertstromdesign: Nachhaltigkeitspotentiale und Engpässe automatisiert erkennen (Master’s thesis). TU Wien, Vienna, Austria.

Demonstrationen (Allgemeine Veranstaltungen)

• Bratu, O., & Wögerer, C. (2023, May 1). Demonstrationen. Lange Nacht der Forschung, Steyr, Austria.

• Hartl-Nesic, C. (2023, March 30). Ein Industrieroboter zum „Anfassen“. Tag der offenen Tür 2023, Online.

• Hartl-Nesic, C. (2024, March 20). Ein Industrieroboter zum „Anfassen“. Tag der offenen Tür 2024, Online.

• Hartl-Nesic, C. (2024, May 24). Demonstrationen. Lange Nacht der Forschung, Vienna, Austria.

• Bratu, O., & Wögerer, C. (2025, March 5). Circular Economy Strategy in Austria. Digital and Circular Transformation of Manufacturing SMEs Conference and Study Visit, Szombathely, Hungary.

• Bratu, O., & Wögerer, C. (2025, March 19). Humanzentrierte Produktionssysteme. Handwerk 2025, Wels, Austria.

• Bratu, O., & Wögerer, C. (2025, March 26). Vortrag ZERO3 als USE-Case für Kreislaufwirtschaft und Robotik Design. European Robotics Forum 2025, Stuttgart, Germany.

• Bratu, O., & Wögerer, C. (2025, May 22). ZERO3 Use Case Vorstellung. Netwerkmetall Workshop, Steyr, Austria.

• Märzinger, W. (2025, January 28). Demonstration Basistechnologien. #automateUPPERAUSTRIA2025, Linz, Austria.

• Hartl-Nesic, C. (2025, June 13). Industrieroboter zum „Anfassen“ / Universelle Roboterarbeitszelle mit 18 Freiheitsgraden. Tag der offenen Tür 2025, Vienna, Austria.

• Hartl-Nesic, C. (2026, March 20). Industrieroboter zum „Anfassen“ / Universelle Roboterarbeitszelle mit 18 Freiheitsgraden. Open Campus 2026, Vienna, Austria

Whitepaper

• Kagerer, O. (2025, March 31). IoT-Edge-Cloud continuum with a microservice base middleware. Fabasoft Website. 
• Kagerer, O. (2025, December 19), Basistechnologiekompendium. Fabasoft Website